- Home
- EOD and Demining
- EOD and Demining equipment
- ELEX-7 Electronic Exploder
ELEX-7 Electronic Exploder
The Elex-7 Single Channel Electronic Exploder is a pocket-sized, single channel high energy electronic initiator designed for activating detonators and fuses.
It is suitable for military (EOD, IEDD, Engineers) and Commercial (demolition and excavation) use anywhere there is a need to use electric detonators and has been proven to be extremely reliable over the 20 years that it has been in military use.
The Elex 7 uses standard 9V alkaline batteries and is supplied in a robust and IP66 dust tight highly water-resistant protective cover enabling it to be used in harsh environments. The unit is easy to operate and has extensive safety features.
Available Colours
Main Features
- Post firing safety circuit cut-off time < 6 milliseconds
- Very compact and robust: high impact covering
- Ergonomically designed: fits snugly into hand
- Uses standard 9V alkaline batteries
- Extensive tests and safety features
- Easy to operate
- The Elex 7 uses standard 9v alkaline batteries
- Supplied in a robust and IP66 dust tight, highly water-resistant protective cover
Download Full Brochure Inadvertent firing is almost impossible because of recessed spring-loaded controls requiring two controls to be depressed simultaneously and in sequence for firing. Depriming occurs automatically if the device is not fired. Despite the high energy output there is no danger to the operator touching the output terminals or conductors even in wet conditions. Any combination of detonator and cable can be used. The Elex-7 has an inhibit circuit to check that the total load is less than 400 ohms. This ensures against misfiring as well as against electric shock.
- Energy: > 6 Joules
- Voltage: > 350 Volts
- Capacitor: 100 microfarad
- Contacts: Spring-loaded terminals for quick connections of leads.
Power Supply
- Two 9v alkaline batteries
- Capacity: More than 250 firings from a set of new batteries at 25°C.
Physical Characteristics
- Width: 79mm
- Length: 155mm
- Height: 32 mm
- Weight: 550g
- Enclosure: Moulded, impact resistant
Environmental
- Operating Temp: -20° to +60°
- Storage Temp: -55°to +85°
- Drop: 2.5m
Safety Features
- Capacitor discharge when ARM button is released
- Will not fire below rated voltage
- Unit can fire into short circuit without being damaged
- Unit will only fire if ARM button is depressed, the firing capacitor is charged to correct voltage and the TEST/FIRE button is depressed.
RELATED PRODUCTS
The Mini Mamba is a small recoilless Disrupter. The Cannon is powered…
The Mamba is a simple lightweight Midi Disrupter with a 100ml capacity…
The Viper is a 4th generation 30mm Midi Disrupter featuring, variable projectile mass…
The Vulkan Disrupter system is a 4th generation maxi modular, variable projectile mass…
